Philharmonic Audio

The Satori Monitor

The Satori monitor is a custom design for a client who decided to cancel the order before the project was completed.  His loss can be your gain.  The monitor uses the top-of-the-line Satori 7.5" Egyptian papyrus cone woofer and matching 1" Satori ring dome tweeter in a 1.0 cubic foot cherry cabinet.  Useful bass response extends to 35 Hz, and the response above that point is +/- 1.5 dB to beyond 20 kHz.  The sound is exceptionally clean and powerful thanks to the low distortion of the Satori drivers and the precision 13-element crossover network.  The Satori monitors are available for $800/pr, which is less than the parts cost.  The cabinets are mint except for one very minor crease on the right side of one of the units.  The cabinets come with magnetic grills.  If you are interested in purchasing the Satori monitors or have questions, just send an e-mail to info@philharmonicaudio.com

Specifications

 
Cabinet 1.0 cu ft Volume With Curved sides and Cherry Veneer
Tweeter Satori TW29R Ring Dome
Woofer Satori MW19P-8 7.5" Egyptian Papyrus Cone
Crossover Linkwitz-Riley 4th Order Acoustic at 1,800 Hz
Frequency Response 37Hz - 20kHz (+/- 1.5 db) Anechoic
Sensitivity 88 dB (2.83v/1M)
Box Alignment Bass Reflex, Front Ported
Dimensions 22" H x (9" Front, 4.5" Back) W x 14.8" D
Weight 38 lbs each
Impedance 8 Ohms

Frequency Response

As shown below, total harmonic distortion is over 50 dB below speaker output from 200 hz to 20 kHz.  In percentage terms, distortion never exceeds .3% in this range, and is typically below .2%.