Philharmonic Audio is pleased to announce the BMR Philharmonitor. The newest member of the Philharmonic family provides a level of performance previously available only in a premium tower speaker, but at substantially lower price. The BMR Philharmonitor is a 3-way design using the same RAAL ribbon tweeter found in the New Philharmonitor, an innovative Balanced Mode Radiator (BMR) midrange driver, and the latest version of the highly respected Scan Speak 8545 7-inch woofer.
Usable bass response extends to 34 Hz in a bass reflex cabinet optimized by Paul Kittinger. The BMR midrange and RAAL tweeter provide exceptional lateral dispersion and an expansive sound stage. The 17-element crossover uses the same high quality parts found in our more expensive speakers and blends the three drivers seamlessly. Pricing starts at only $1,350/pr plus shipping, not to exceed $100 for Continental U.S.
The most unique feature of the new design is the Balanced Mode Radiator midrange driver. Conventional drivers function in simple pistonic fashion across their frequency range. Eventually the response becomes chaotic as severe breakup modes develop from the applied mass of the voice coil interacting with the driver mass, which greatly restricts the usable range of operation. The BMR is a flat-diaphragm speaker that uses strategically placed weights in the diaphragm to counteract the mass of the voice coil at higher frequencies.
The driver operates as a piston at lower frequencies, but shifts to a bending wave motion mode in the lower treble, and to a second bending mode in the upper treble. The result is greatly reduced breakup and extremely broad dispersion above 2,000 Hz. This driver is used as both a midrange and tweeter in several commercial applications. Although the BMR can function acceptably in this fashion, its true strength is upper midrange performance. The highest frequencies are much better served by the RAAL ribbon tweeter.
Bass frequencies are handled by a recently improved version of the classic Scan Speak 8545 7-inch woofer. This driver has long been noted for its superior bass reach and low harmonic distortion. The large volume of the BMR cabinet and expert port tuning by Paul Kittinger allow the Scan Speak woofer to provide useful bass response to 34 Hz. This means you can experience the power of a pipe organ or bass drum without the expense of a tower speaker or the complexity of a subwoofer.
The BMR Philharmonitor is available in a custom black cabinet with magnetic grills for only $1,350/pr. The BMR is also available in a cherry cabinet with curved sides for $1,450/pr. Finally, Jim Salk of SalkSound can build you a pair of BMR's in virtually any veneer and finish you desire. Salk BMR's in maple, mahogany, cherry, or walnut are priced at $1,600/pr with standard finish, and $1,800 with a furniture grade finish. Other premium and exotic veneers are available for the added cost of the veneer.
The following graphs illustrate the frequency response performance of the BMR Philharmonitor. The first plot shows the very smooth on-axis response, which is free of any fatiguing peaks. The second graph combines the on-axis curve (red) with the response at 30 degrees off axis (dark blue) and the response a full 80 degrees off axis (green). The extremely broad radiation pattern at even the highest frequencies provides a very wide listening position and excellent sound staging. Further, because the dispersion characteristics of the drivers are so well matched at their crossover points, there is no need for wave guides that can color the sound and narrow the listening window.